AR-15 & AR-10 | Parts
Cleaning & Maintenance
Electronics
Handgun Parts
Rifle Parts
Safes & Vaults
Ammo | Handgun
`Ammo | Rifle
`Ammo | Rimfire
Handguns
Long Guns
Upper and Lower Sets
Shotguns
Apparel
Shooting Gear
Tactical Gear
Chemical & Pepper Sprays
Knives & Blades
Tasers & Stun Guns
AR-15/AR-10 Magazines
Handgun Magazines
Long Gun Magazines
Firearms
Suppressors
Grenade Launchers
Laser Rangefinders
Other Optics & Accessories
Night Vision Systems
Thermal Imaging Systems
Tactical Optics
CHEY-TAC Certified Training Courses
THOR Precision Long Range Training Center
THOR Vacation Club
Law Enforcement Only
Military Only
Model: EXPS3-2TAN
Manufacturer: EOTECH
Add to cartAdd to Wishlist
The EOTech EXPS3-2 holographic red-dot sight provides rapid heads-up-both-eyes-open target acquisition. Sporting a shortened form factor like the original XPS3, The EXPS3-2 also boasts a repeatable quick release throw-lever mount.
Because it is powered by a single transverse-mounted CR123A battery, the EXPS3-2 is shorter than the N and AA battery versions - yet it delivers the same parallax-free sighting capabilities. This sight requires a mere 2.75" of rail space, and the battery compartment is raised to accommodate the Delta Ring of most M16/AR15 platform firearms. The base is configured with a 7.0mm rise to accommodate hand guards and instant access to BUIS. The battery cap is a simple screw-type cover that's O-ring sealed and tethered to the housing.
The control buttons have been placed on the left side of the rugged aluminum housing for ease of operation with a rear-mounted night vision device. The illuminated reticle is configured with a 65 MOA circle and a pair of 1 MOA dots - the illumination system provides the operator with 30 brightness levels to choose from, 10 of which are compatible with night vision gear.
Designed for today's high-tech battlefield; the EXPS3-2 is submersible to a depth of 33', and the QR throw-lever mount is repeatable to 2 MOA after remounting. The rear window is a 3/16" thick shatterproof laminate with anti-glare and scratch resistant coatings, and the front lens is 1/8" solid glass. Because the optical system is based upon transmission holography, parallax error is not an issue.
The EOTECH EXPS3-2 Holographic Weapon Sight is a lightweight, non-magnifying, optical sight designed for close to mid-range engagements. It provides extremely fast target acquisition and engagement at short ranges while providing aiming capability out to 300 meters equal to or better than iron sights. The EXPS3-2 features easy-to-adjust side buttons, a quick-detach lever, and a transversely mounted, lithium CR123A battery. The increased height of the EXPS3-2 creates a lower 1/3 co-witness with iron sights.
This is the optic of choice for the technologically advanced modern rifle hunter. Its night vision-compatibility makes it a versatile choice for day or night hunting. The 68 MOA ring with two-dot reticle pattern can be easily distinguished with or without magnification. It provides four usable aiming points; 50 and 200 yards at the center dot, 500 yards at the second dot, and 7 yards at the bottom of the circle.
Quick-detach lever compatible with 1” Weaver and MIL-SPEC Picatinny rails
Powered by (1) CR123A lithium battery
Runtime: 600 continuous hours at setting 12 at room temperature
20 daylight settings with 10-night vision settings
Submersible to 33 ft
Length: 3.8”
Width: 2.3”
Height: 2.9”
Weight: 11.2 oz
Magnification Range:
1x
Power Supply:(1)
123 lithium battery
Dimensions:
3.5"x2.4"x2.8" (L x W x H)
Weight:
11.2 oz
Reticle Details
68 MOA Ring w/ 1 MOA Ballistic Dot
Battery Life:
600 continuous hours at nominal setting 12
Battery Type
CR123A
Product Type
Holographic Sight
Brightness Settings
10 NVD 20 Regular
Night Vision Compatible
Yes
Item Condition
New
Color
Tan
UPC
672294600398
MPN
EXPS3-2TAN
HWS EXPS3™
Quick-Start Guide
Warranty Card
CR123 Battery
Protective Case